|
Table Lamp
This
lamp brings the warmth of wood into your living room or
den by combining two complimentary woods together in a
simple and contemporary table lamp.The cherry and
walnut combination almost glows under the incandescent
light. The top, base and trim pieces of our lamp are
walnut, with the lamp itself being made of cherry.
See this woodworking plan ...
|
|
|
Lap Desk
With a soft cushion filling, the portable lap desk gives
the ability to work and write in almost any location.
The finished size of the cushion is 2 1/2" x 10" x 15".
It is designed to be 2" smaller than the top so that
routing the stopped rabbet will require only one setup
on the router table or router edge guide.
See this woodworking plan ...
|
|
|
3 Carpenter's Tool Boxes
Three plans for Carpenter's Tool Boxes.One simple
plan suitable for a project with your child; a second
plan featuring a tool box with a drawer in the bottom,
and a third tool box plan with a removable tray in the
bottom so you can store additional tools and an second
tray just below the handle.
See this woodworking plan ...
|
|
|
Adjustable Lap Desk
The Adjustable Lap Desk is designed to give you a stable
work surface while sitting in a chair or on a sofa,
while adjusting to varying angles and heights to
accommodate your position.
The completed desk is 20 1/2" wide (at the base) by 15"
high, with the top 14 1/2" deep.
See this woodworking plan ...
|
|
|
Adirondack Chair
The distinctive Adirondack chair takes its name from the
high country in upstate New York. Traditionally made
from redwood lumber, it’s a lawn chair which features a
combined seat support and back leg, giving it the lines
that just make you want to put it under a tree, grab a
book and a nice long drink and forget the world around
you.
The completed chair is approximately 27” wide x 27 1/2”
deep by 28 1/2” tall, and with selective shopping
standard patio chair cushions can be obtained to fit.
See this woodworking plan ...
|
|
|
Gum Ball Machine
Remember waiting to see what color would roll out? By
using cut-offs from the workshop you can make your own
gumball dispenser, and save your coins. It’s designed
for round balls about 3/4” in diameter. As most gum
balls are not perfectly round, there may be the
occasional jam, but a pinball style ‘tilt’ will get the
rewards flowing again.
See this woodworking plan ...
|
|
 |
Outdoor Plant Stand/Potting Table
An exterior plant stand is a great way to display a
collection of special plants for maximum visible
benefit. The stand includes a built-in gravel filled
tray which holds water to provide high humidity for
plants which need extra moisture.
The completed stand is approximately 72” wide x 24” deep
by 48” tall.
See this woodworking plan ...
|
|
|
FoldUp Picnic Table
Outdoor furniture is great when entertaining, but
what if you don’t have the room in the yard to keep a
table and seats or you simply don’t want the clutter
after the guests have gone home? This trestle table and
matching seats may be the answer. When they’re not
needed, they can be folded away and stored flat against
a wall, in the garage, under the house, in fact, almost
anywhere.
Coming Soon!
|
|
|
Dart Board Cabinet
Hit the bulls-eye with this easy-to-build project!
A dartboard makes the perfect addition to any family
space. And what better way to display and store it than
in this attractive, custom-built cabinet that’ll hold
the board, the darts, the chalk and the scoreboard?
Coming Soon!
|
|
|
Lattice Arbor
The trouble with plants is that they grow and grow and
grow. They are meant to, of course, but some favorites
such as wisteria form unruly clumps or grow into trees
unless they are kept under control. And what better way
to train them than over an inviting arbor.Coming Soon!
|
|
|
Rocking Horse
Mission-style furniture evokes the old Southwest with its flat arms and spindle motif. The bold and elegant lines of this sofa (which measures 213 cm (W) x 94 cm (D) x 76 cm (H)) are not overpowering, being pleasantly softened by the gently curved upholstery of the back...
1 inch = 2.54 cm
Coming Soon!
|
|
 |
Simple Arbor
An arbor can frame a view, be an inviting gateway or
provide a lush boundary for a patio or deck.Coming Soon!
|
|
|
Wheel Barrow Planter
Here’s a great project for making the most of what
spring has to offer – a cute flower cart to fill with
potted color, and change and replenish whenever you
wish.
So, need some color? Just wheel it in.Coming Soon!
|
|
|
Display Coffee Table
This coffee table functions as both an occasional table,
but also as a focal point for the items it displays. The
top drawer runs the entire width of the table and
provides a setting for display of various knick-knacks,
curios and keepsakes. Though outwardly similar in
appearance, the bottom drawer is actually two drawers
separately accessed from each side.Coming Soon!
|
|
|
|
Wall-Mount Gun Rack
This gun rack, though not as fancy as an enclosed
display cabinet, provides a lot of alternatives for
changing its style, design and construction, and can be
expanded to handle more rifles or shotguns by simply
adding additional hooks during your initial layout.
Coming Soon!
|
|
|
|
Suitcase Rack
Guests are coming; the room is ready or is it? Where
will they put their suitcases? The chest of drawers is
too high and the bathroom counter isn’t big enough. So
why not get busy and make this Suitcase Rack?It’s the
perfect size and they’re so handy when you go to a
hotel, why shouldn’t you have the same convenience in
your own guest room?
Coming Soon!
|
|
|
|
Rug Wall Hanger
It’s a simple design, using an adjustable bottom molding
with threaded inserts and screws to clamp the top of the
rug. The design allows you to change the length to
accommodate any width rug. A purchased appliqué carving,
centered at the top adds a little ‘style’.Coming Soon!
|
|
|
Outdoor Swing Shelter
Coming Soon!
|
|
|
|
3 Birdhouses and Feeders
Coming Soon!
|