| Home |
| Our Plans |
| Specials |
| Plans From The Web |
| FAQs |
| Testimonials |
| Customer Service |
| About Us |
| Contact Us |
|
Table Lamp
Woodworking Plan |
|||
Mixed Wood Table Lamp.
This
lamp brings the warmth of wood into your living room or
den by combining two complimentary woods together in a
simple and contemporary table lamp. The cherry and
walnut combination almost glows under the incandescent
light. The top, base and trim pieces of our lamp are
walnut, with the lamp itself being made of cherry.You could also reverse the walnut/cherry combination, use a cherry/maple combination, or even a maple/walnut combination. The lamp is essentially a tall box with custom molding on the edges and covered by a top and bottom cap. This unique plan design uses simple, straightforward joinery — most of which consists of simply screwing one board to another. You'll need to cut a rabbet for the shaft and some half laps for the base, but we'll show you the techniques for doing that.
The lamp
hardware can be found at any hardware store or home
improvement center. And if you’re not comfortable with
the wiring, your local lamp shop should be able to help
with any questions. |
|||
|
|
|||
 WHAT
YOU GET4 pages of step-by-step instructions  Exploded viewsMaterials
listCutting diagram
and cutting scheduleAll for only $4.95 |
|||
 Download
Plan to Your ComputerThis plan is a downloadable PDF file that you will save to your computer after you complete your order. |
|||
Suggested
power tools: Table saw, router (optional), drill
(for the top hole).